Diamond Painting Canada Flag Pin SWAP

Description

Kit makes 24 diamond painting flag friendship swaps. Approximately 2″ x 1.25″

Includes:

• 23 Packs of Round Diamond Gems
• 24 Flat Back Pins
• 1 Printed Card Stock with 24 Flag Patterns
• 1 Diamond Adhesive Sheet
• 1 Diamond Tray
• 1 Diamond Placing Tool
• 1 Diamond Wax
• 2 Mini Zipper Bags
• Detailed Step-by-Step Instructions with Photos

Basic Instructions:

1. Check your gem packs against the color key.
2. Peel down the corner of the adhesive  backing. Line it up with the corner of the printed flag pattern sheet. Continue peeling the backing and while you press the adhesive to the sheet.
3. Pour a small amount of each color of gems into the tray. Shake gently back and forth to turn the gems right side up.
4. Push the placing tool tip into the wax. Remove any excess wax around the tip.
5. Holding the placing tool straight up (not on an angle) lightly push the tip to a gem.
6. Place the gem on a corresponding color of the pattern.
7. Continue to place gems. For best results, work in a checkboard placement until the flag has every other spot filled. Then go back and fill in between the placed gems.
8. When all flags are complete, seal the page of patterns with a sealer or mod podge. Let dry.
9. Cut flags apart close to the edge of each flag.
10. Hot glue a pin to the back of each flag.

Additional information