TO PRINT JUST THE PATTERN, RIGHT CLICK ON THE IMAGE AND SELECT "PRINT PICTURE".

You need:

• Bead Loom and Pattern
• Instructions for using a Bead Loom
• Key Rings ("BEADIES" Pattern Shown uses 6 Rings)
• Extra Cord and Optional Beads for Hanging
• Scrap Wood or Heavy Cardboard
• Tacky Glue

Instructions:

Weave beads according to pattern leaving 12" of cord at starting point. This will be used for hanging the display. Metal rings should be spaced evenly. For "BEADIES" the first ring is added at the 2nd row before stringing back through the beads. Continue weaving adding a ring every 6 rows. Leave extra 12" of cord at finishing point for hanging the display.

Cut a piece of scrap wood or heavy cardboard slightly smaller than woven pattern. Coat 1 side with tacky glue. Carefully lay your woven beads on top. Let dry. If desired, string beads on both pieces of extra cord that was left at starting and ending points. Trim cords to even lengths and tie off.